Call Us: 972-345-0472
Connect With Us
If It's Clear - It's Here
Retail - Wholesale - Bulk
Looks perfect in any setting
Perfect for Vinyl Applique or Laser Engraving

This exceptional value is our pre-packaged, volume discounted, Round Polystryene Bottle Stopper blanks are ready for use or for crafting. This very popular stopper design is manufactured to the highest standards for quality and ready for personalization regardless if that happens to be via vinyl applique, laser engraving, hand-painting or other creative venue. This high impact material resists crazing and cracking, will not yellow as result of exposure to either direct sunlight or incandescent lighting, cleans easily and is inexpensive to replace if needed. Lightweight yet "tough as nails", this one piece molded product includes a ribbed silicone stopper base for a tight, complete air seal protecting even the most expensive wines or other liquids from taste loss and allowing them to stay fresh for days on end. Disc diameter measures 1.5" so there is plenty of room to be creative and 1/4" thick.  Overall shipping weight & measurements is approximately 6x6x6 @ 1 Lb.

And, the BIG answer to an existing problem when ordering elsewhere. Most wholesale orders originate from China, are PVC plastic composites and each stopper is individually wrapped in cheap, commercial grade tissue paper causing virtually every piece to be hand polished to remove exterior imperfections, not to mention that most . Not with us. Our stoppers are machine polished before being individually sealed in their own clear poly bag. NO waste of your time or money!

If greater volumes than 12 are required you can purchase our pre-packed cartons of 25, 60, 75 or 100 and save even more money.  The greater the quantity order the less the price. Additional price discounts are available for larger, bulk orders. Please call for price quotes (972) 345-0472 or e-mail us at

Related Products
Price : $22.45
Mark Down Price : $18.72
Price : $41.88
Mark Down Price : $35.88
Price : $57.95
Mark Down Price : $52.02
Price : $75.50
Mark Down Price : $66.96
Price : $138.72
Mark Down Price : $114.72
Price : $108.00
Mark Down Price : $93.24
Price : $264.00
Mark Down Price : $191.04


Product Status : Available
SKU : AGW1515-12
Price : $21.00 Round Acrylic Bottle Stopper (12-Pack)
Mark Down Price : $15.00
p/ Item or p/ Set
Round Acrylic Bottle Stopper (12-Pack)
Savings p/ item or p/ set
Quantity :
Packaged Dimensions:
Weight : 1.0
Width : 5
Height : 3
Length : 5

Care of Acrylic Products:

Although acrylic compounds are tough as nails when it comes to durability, their life can be shortened if not taken care of properly while cleaning. Acrylic products do not go into any commercial or home dishwasher unless otherwise stated, rather, simply hand wash in warm water using liquid soap, rinse and then pat dry. That's it! No scrubbing, no scouring no abrasive cleaning agents or solvents required. Its easier on the products and you. Only a very few acrylic products are made for commercial dishwashers and we will tell you which (if any) such items we have on their respective product page. Acrylic is not meant for microwave use at all. 

Production Notes: 

Please note an occasional miniscule bubble(s) may appear within any injected mold product as the hot liquid acrylic is forced into compact sizes and shapes under extreme air pressure. We have a stringent quality control process that virtually eliminates this from happening, however, it is always a possibility when this production process is utilized. Scratch your acrylic products? You probably have a remedy at home already. Simply take a small dab of toothpaste and lightly rub it in a circular motion applying a small amount of pressure but not too much pressure. Rub for about 30 seconds or so and wipe with a clean dry non-abrasive cloth. This should eliminate most all light surface scratches.

Weights & Measurements:

All weights and measurements are as accurate as possible and may include some outside packaging or boxing used in shipping in order to accurately calculate shipping weights and costs associated with any purchase.


 For all of our higher volume users, if there is a quantity not shown on any product in which you have an interest please do not hesitate to contact us immediately. We will gladly provide you a non-published rate if available based upon current pricing, availability of product or other influences that may effect any additional discounts. Please e-mail info@AcrylicGiftware.Com or call us at (972) 345-0472.


Bulk is a term used to describe items that are collectively packed in one carton from the manufacturing plant to us. Once in our warehouse, and as customer orders dictate, these items are selected, re-packed in the quantities that individual customer orders require and shipped. Some of our products already come pre-packaged in various quantities (6, 12 etc.) and we note these where possible as we do for those few items that are gift boxed. Due to manufacturing demands, the shipping container sizes, volumes and pre-boxing may change without notice.

"BULK" products (typically 500+ ea.) also refer to our ability to provide individual items in mass quantities, as demanded by our clients, at reduced rates when manufactured and purchased at one time. In these instances it may take 90 days (+/-) in order to complete the production, ship here and then on to our customers, however, the volume required vs. the price savings over wholesale are worth it. 

Shipping Notes:

Unless specified otherwise, all orders are shipped "Ground" whether by FedEx or the United States Postal Service's Priority Mail, whichever is the quickest method out our door to you. Other, more immediate and optional, methods of transportation are available at time of "Check Out" at additional cost. 

About Us         Customer Service         Shipping & Returns         Site Map
Copyright © All Rights Reserved.
Web Site Design by Idealgrowth